Amphenol Tru-Loc Splitter
Amphenol’s Tru-Loc splitter reduces the number of connectors needed in an application.
Amphenol Industrial Products Group now offers a signal splitter featuring six terminal inputs that allow for a higher combination of functions in a single connector. The Tru-Loc splitter helps to reduce the number of connectors needed in an application.
Amphenol’s new splitter receives power and signal from one cable and splits it into two equal, yet separate, sets of power and signal as output, saving money and space while allowing additional functionality.
Made from thermoplastic material and capable of operating in environments up to +150°C, the Tru-Loc splitter is ideal for use by OEMs in several markets. These include industrial automation, process control, power generation, diesel, LNG and gas engines, automotive sensing and cycling (electronic gear shifting), as well as the industrial Internet markets.
These splitters are employed in CANbus networks: CAN-high, CAN-low, ground or shielded, I/O power, and low amperage power distribution, as well as sensor harnessing.
They feature 120 Ohm +/-10% of controlled impedance between two sets of contact pairs – perfect for multiple sets of sensors in the same network. The mating plug connectors feature Amphenol’s RADSOK socket contacts.
The Tru-Loc splitters offer up to 13A current capability per contact and dielectric withstanding of 1,600 VAC rms.
Amphenol’s six-terminal signal splitter has an operating temperature range from -40°C to +150°C.
- MikroElektronika Intel Joule click shields - May 10, 2017
- Right Angle Board-to-Board Battery Connectors Suit High Shock and Vibration Applications - May 10, 2017
- Compression Pulling Head Family Offers Six Sizes - May 3, 2017