Mill-Max SMT Headers with .030” Diameter Pins

By Connector Supplier | March 18, 2013

Mill-Max SMT Headers with .030” Diameter Pins

Mill-Max has added a heavier-gauge option to its line of SMT interconnect headers with the introduction of two new connectors. Its latest SMT male pin header strips feature sturdy .030” (0.76mm) diameter pin tails, which plug easily into a variety of standard Mill-Max mating socket strips. The mating sockets are available in thru-hole, right-angle, and SMT configurations. These header and socket combinations are rated at 4.5 amps per pin for a 10°C temperature rise above ambient.

The headers feature a round stub-tail termination, providing the benefit of a reduced solder footprint inside the package outline. The .008” floating pin design compensates for the peaks and valleys found in uneven solder paste application on the board surface, promoting good solder joints. The .030” (0.76mm) diameter pins provide extra strength for applications where there is the potential for rough handling, such as for field service repairs or blind mating situations.

With gold-plated pins assembled in high temperature thermoplastic, these headers are suitable for all SMT soldering operations and provide a highly reliable and durable connection. The headers are available in single row, series 349-10-1XX-00-560000 (two to 64 positions) or double row series 449-10-2XX-00-560000 (four to 64 positions: 2×2 to 2×32).

Visit Mill-Max online.

Connector Supplier
Latest posts by Connector Supplier (see all)
Get the Latest News