The new Amphenol Pcd Pegasus Series are twist-and-lock, scoop-proof connectors that offer EMI shielding and protection from ambient noise transients. Amphenol Pcd announced the Pegasus Series, a lightweight aerospace connection system. These twist-and-lock, scoop-proof connectors provide the same convenience and weight savings of the Luminus Series, with the added benefit of EMI shielding and protectionRead More
FCI SFP+ Active Optical Cable is a new generation of low-power AOC that is compliant with 10Gb Ethernet and Fiber Channel signal transmission protocols. FCI has introduced its SFP+ Active Optical Cable (AOC). This new generation of low-power AOC is fully compatible with the SFF-8431 industry standard, plug-compatible with SFP+ hardware ports, and compliant with 10Gb Ethernet andRead More
The TE Connectivity NECTOR M Power System is an expandable power system solution that improves reliability and reduces installation time. TE Connectivity announced its newly enhanced NECTOR M Power System. In addition to meeting IEC 61535 standards, the power system solution is designed to meet the UL 1977 guidelines and just debuted a five-position splitter that provides power,Read More
The SOURIAU WME cable connectors are ideal for a wide variety of harsh-environment applications from road service vehicles to agricultural, mining, and mobile machinery. The SOURIAU WME cable connector series is approved by the EN 16330 for both outside and inside cabin connectivity. This European standard applies to power systems, drive implements, and attachments such as street cleaningRead More
The LEMO OT Series is a watertight connector that uses the company’s original push-pull technology. LEMO announced a new watertight connector, the OT Series, which is ideal for defense/security, test and measurement, medical, and other applications. The OT Series connector is a small, watertight connector that uses the original LEMO push-pull technology. Based on the LEMO B Series, theRead More
The Weidmuller dual-level power terminal blocks provide a 50% reduction in cabinet space. Weidmuller expands its line of space-saving, dual-level power terminal blocks designed for use in machinery, process, and power generation applications. The new WDK 10 dual-level power terminal series offers a 50% reduction in cabinet space when compared to single-level terminals. Featuring a slimRead More
FCI’s new 25Gb/s optical on-board transceiver, just one square inch in size, features 12 transmit and 12 receive channels. FCI has released the Leap On-board-Transceiver (OBT) system. The one-square-inch board-mounted optical module features 12 transmit and 12 receive channels, each working at 25Gb/s over distances up to 100m with a total of 300Gb/s throughput. The OBTRead More
The Hermetic Seal Corporation’s HTX connector for aerospace applications performs in temperatures ranging from -65°C to +440°C. Hermetic Seal Corporation, a unit of AMETEK Interconnect Technologies, has developed interconnection technology that meets the increasingly stringent temperature range and leak rates required for even the most highly demanding aerospace applications. The new HTX connector not only performsRead More
The new Mill-Max discrete right-angle pins are available in four diameters. Mill-Max introduced a series of discrete right-angle pins. The 37XX-0 pins are available in four different diameters and are suitable for plugging into receptacles and/or soldering onto printed circuit boards. Four standard diameters are available: .020″, .025″, .030″, and .040″ (0.51mm, 0.63mm, 0.76mm, and 1.02mm). TheseRead More
TE INSTALITE Molded Heat-Shrink Boots reduce weight by up to 30%. TE Connectivity (TE) announced new INSTALITE Molded Boots that are up to 30% lighter than TE standard -25 boots. These high-performance molded heat-shrink boots have been designed for applications in military ground systems, aerospace, and marine. Their optimized interior geometry reduces installation time asRead More
The Hirose I/O connector for cable and docking stations features a unique contact structure that offers 20,000 mating cycles. Hirose now offers a rugged I/O connector that combines small size and light weight with high reliability and long operating life. The compact 3800 Series I/O connector is designed for cable and docking station applications withinRead More
The new Amphenol RadFin power connectors use RADSOK technology to deliver up to 300A at a single point of contact. Amphenol Industrial Products Group now offers a new high-current PCB power connector that enables single-point power delivery of 150A, 200A, and 300A in less than one linear inch of a PCB edge. Amphenol’s RadFin powerRead More
