FCI’s new 25Gb/s optical on-board transceiver, just one square inch in size, features 12 transmit and 12 receive channels. FCI has released the Leap On-board-Transceiver (OBT) system. The one-square-inch board-mounted optical module features 12 transmit and 12 receive channels, each working at 25Gb/s over distances up to 100m with a total of 300Gb/s throughput. The OBTRead More

RF Industries’ Low-PIM QMA cable assembly provides verifiable performance for DAS applications. RF Industries manufactures cable assemblies using Times Microwave TFT-402-LF plenum-rated, low-loss, low-PIM, flexible cable terminated with QMA male straight or right-angle connectors. LTE networks experience decreased system performance due to interference caused by passive intermodulation (PIM) in distributed antenna systems (DAS). Traditional cable assembliesRead More

The Hermetic Seal Corporation’s HTX connector for aerospace applications performs in temperatures ranging from -65°C to +440°C. Hermetic Seal Corporation, a unit of AMETEK Interconnect Technologies, has developed interconnection technology that meets the increasingly stringent temperature range and leak rates required for even the most highly demanding aerospace applications. The new HTX connector not only performsRead More

In preparation for its upcoming roadmap publication, iNEMI is researching the state of the industry with questionnaires on high-speed connector testing and connector reliability. See how you can be part of it.    The International Electronics Manufacturing Initiative (iNEMI) is looking for input from members of the connector industry to help in compiling its annualRead More

The new Mill-Max discrete right-angle pins are available in four diameters. Mill-Max introduced a series of discrete right-angle pins. The 37XX-0 pins are available in four different diameters and are suitable for plugging into receptacles and/or soldering onto printed circuit boards. Four standard diameters  are available: .020″, .025″, .030″, and .040″ (0.51mm, 0.63mm, 0.76mm, and 1.02mm). TheseRead More

TE INSTALITE Molded Heat-Shrink Boots reduce weight by up to 30%. TE Connectivity (TE) announced new INSTALITE Molded Boots that are up to 30% lighter than TE standard -25 boots. These high-performance molded heat-shrink boots have been designed for applications in military ground systems, aerospace, and marine. Their optimized interior geometry reduces installation time asRead More

The Hirose I/O connector for cable and docking stations features a unique contact structure that offers 20,000 mating cycles. Hirose now offers a rugged I/O connector that combines small size and light weight with high reliability and long operating life. The compact 3800 Series I/O connector is designed for cable and docking station applications withinRead More

The new Amphenol RadFin power connectors use RADSOK technology to deliver up to 300A at a single point of contact. Amphenol Industrial Products Group now offers a new high-current PCB power connector that enables single-point power delivery of 150A, 200A, and 300A in less than one linear inch of a PCB edge. Amphenol’s RadFin powerRead More

Anderson Power Products Expands Mini PL SPEC Pak family with new three- and five-pole versions. The Anderson Power Products (APP) Mini PL SPEC Pak is a series of compact, environmentally sealed connectors. Mini PL SPEC Pak connectors are touch-safe on both sides and feature a latching shell. Power-handling capabilities up to 23A and 600V AC/DC perRead More

A growing demand for smaller and lighter electronic devices drove the development of Gradconn’s Nano SIM card connector. Gradconn has expanded its SIM Card Connector family with the CH03-KA. , such as handheld devices or wearable mobile products. The Nano SIM card connector is a six-contact, push-pull connector that measures 12.3mm x 10.0mm with a 1.55mm profile. It’sRead More

The DesignCon Awards for Design & Test have been announced, and Mentor Graphics was recognized in the interconnects technologies and components category. From the 20th annual DesignCon show being held this week in Santa Clara, Calif., event organizers announced the winners of the Best in Design & Test awards, recognizing the best product advancements in electronic engineering.Read More

With so many presentations, events, and exhibitors, you might need a few tips on navigating the show once you arrive in Santa Clara. Check out our 2015 DesignCon Short List for recommended show highlights.   Is this your first DesignCon? If so, be sure to attend the welcome breakfast on Tuesday, January 27, at 7:45 a.m.Read More