Bishop & Associates crunched the numbers and here is its report on the connector industry’s performance in 2014. Connector industry sales were up +5.1% in the fourth quarter of 2014 to $13,090 million. Connector sales grew +8.1% for the full year 2014 to $52,855 million. The following table shows connector sales by quarter for 2014.Read More

The Phoenix Contact miniature M12 connector offers higher-power, S-coded connectors and cordsets rated to 16A. Phoenix Contact has expanded its M12 connector range for power transmission in industrial environments with S-coded, flush-type connectors and cordsets rated to 16A and 630V (ratings are per IEC; UL 2237 is pending). Standard S-coded connectors, rated to 12A, areRead More

The new Amphenol Pcd Pegasus Series are twist-and-lock, scoop-proof connectors that offer EMI shielding and protection from ambient noise transients. Amphenol Pcd announced the Pegasus Series, a lightweight aerospace connection system. These twist-and-lock, scoop-proof connectors provide the same convenience and weight savings of the Luminus Series, with the added benefit of EMI shielding and protectionRead More

FCI SFP+ Active Optical Cable is a new generation of low-power AOC that is compliant with 10Gb Ethernet and Fiber Channel signal transmission protocols. FCI has introduced its SFP+ Active Optical Cable (AOC). This new generation of low-power AOC is fully compatible with the SFF-8431 industry standard, plug-compatible with SFP+ hardware ports, and compliant with 10Gb Ethernet andRead More

The TE Connectivity NECTOR M Power System is an expandable power system solution that improves reliability and reduces installation time. TE Connectivity announced its newly enhanced NECTOR M Power System. In addition to meeting IEC 61535 standards, the power system solution is designed to meet the UL 1977 guidelines and just debuted a five-position splitter that provides power,Read More

The SOURIAU WME cable connectors are ideal for a wide variety of harsh-environment applications from road service vehicles to agricultural, mining, and mobile machinery. The SOURIAU WME cable connector series is approved by the EN 16330 for both outside and inside cabin connectivity. This European standard applies to power systems, drive implements, and attachments such as street cleaningRead More

The LEMO OT Series is a watertight connector that uses the company’s original push-pull technology. LEMO announced a new watertight connector, the OT Series, which is ideal for defense/security, test and measurement, medical, and other applications. The OT Series connector is a small, watertight connector that uses the original LEMO push-pull technology. Based on the LEMO B Series, theRead More

The Weidmuller dual-level power terminal blocks provide a 50% reduction in cabinet space. Weidmuller expands its line of space-saving, dual-level power terminal blocks designed for use in machinery, process, and power generation applications. The new WDK 10 dual-level power terminal series offers a 50% reduction in cabinet space when compared to single-level terminals. Featuring a slimRead More

FCI’s new 25Gb/s optical on-board transceiver, just one square inch in size, features 12 transmit and 12 receive channels. FCI has released the Leap On-board-Transceiver (OBT) system. The one-square-inch board-mounted optical module features 12 transmit and 12 receive channels, each working at 25Gb/s over distances up to 100m with a total of 300Gb/s throughput. The OBTRead More

RF Industries’ Low-PIM QMA cable assembly provides verifiable performance for DAS applications. RF Industries manufactures cable assemblies using Times Microwave TFT-402-LF plenum-rated, low-loss, low-PIM, flexible cable terminated with QMA male straight or right-angle connectors. LTE networks experience decreased system performance due to interference caused by passive intermodulation (PIM) in distributed antenna systems (DAS). Traditional cable assembliesRead More

The Hermetic Seal Corporation’s HTX connector for aerospace applications performs in temperatures ranging from -65°C to +440°C. Hermetic Seal Corporation, a unit of AMETEK Interconnect Technologies, has developed interconnection technology that meets the increasingly stringent temperature range and leak rates required for even the most highly demanding aerospace applications. The new HTX connector not only performsRead More

In preparation for its upcoming roadmap publication, iNEMI is researching the state of the industry with questionnaires on high-speed connector testing and connector reliability. See how you can be part of it.    The International Electronics Manufacturing Initiative (iNEMI) is looking for input from members of the connector industry to help in compiling its annualRead More