The Yamaichi Y-Circ P Push-Pull Circular Connector offers cost benefits due to materials reduction and a space-saving design. Yamaichi Electronics introduced a series of circular connectors with a push-pull locking mechanism. The connectors, which are made in Germany, offer cost benefits due to materials reduction and a space-saving design. The Y-Circ P connectors have a push-pull locking mechanism that permits the simple insertion andRead More

DG Interconnect expands the Eclipse family of products with the QL-5 Mini Auto-Coupling Connector.  DG Interconnect introduced the QL-5 Series connector to meet the growing demand for a miniature, high-density connector capable of ultra-high mating cycles in a cost-effective package. “The QL-5 is the perfect complement to our QL-7 Series product line. The medical industry hasRead More

CONEC added bayonet-to-bayonet coupled IP67-sealed options to its IP67 RJ45, USB, and LC Duplex lines.  CONEC now supplements its IP67 RJ45, USB, and LC Duplex product ranges with a new in-line coupler variant that provides bayonet locking on both ends, not just the outside connection. To establish IP67-protected interfaces, modern industrial applications have high requirements for the connectors used. CONECRead More

Minitek Pwr 3.0 and 4.2 connectors mark FCI’s first foray into the mid-power wire-to-wire and wire-to-board markets. FCI announced the launch of the cost-effective Minitek Pwr 3.0 and Minitek Pwr 4.2 connectors. FCI’s Minitek Pwr 3.0 is designed for power applications with current ratings of up to 5A per contact. Engineered for wire-to-wire and wire-to-board applications, its crimp-and-snap-in receptacles are used to terminate AWGRead More

The telecom interconnect market is the third largest market sector by annual revenues. In 2013, the worldwide market for interconnect products used in telecom (telecom/datacom) totaled $25.0 billion including connectors and cable assemblies. Individually, connectors accounted for $9.8 billion in sales and cable assemblies equaled $17.9 billion. The figures cannot be directly added to getRead More

To increase the capacity of their networks, service providers are deploying more and more fiber. While that keeps pace with the demand for bandwidth, it creates another set of problems. TE Connectivity’s solution is small-diameter cable technology. The following white paper excerpt was provided by TE Connectivity. Business and residential subscribers all over the worldRead More

TPC’s Super-Trex High-Flex Crane Cable reduces corkscrewing in crane and reeling applications. TPC Wire & Cable introduced a new product to its Super-Trex family of cables. The Super-Trex Heavy-Duty Flex Crane Cable was designed specifically for crane and reeling applications. TPC’s extensive family of long-lasting Super-Trex electrical cords and cables was designed and engineered to perform inRead More

While its industry-standard passive SFP+ DAC assemblies have been tested and proven for interoperability, these new Siemon Cisco-compatible SFP+ direct-attached copper cable assemblies are programmed specifically to work with network equipment with 10GBASE-CX1 ports. Siemon, a network infrastructure specialist, announced SFP+ Copper twinax direct-attach cables (DACs) that are programmed for compatibility with Cisco equipment. While Siemon’s industry-standard passive SFP+Read More

RF Industries’ plenum-rated low-PIM cable assemblies for in-building distributed antenna systems incorporate Mini DIN connectors. The 4.1/9.5 (Mini) DIN connector interface is essentially a compact version of the 7/16 DIN for applications on DAS (Distributed Antenna Systems) and wireless infrastructures. RF Industries manufactures 4.1/9.5 (Mini) DIN male connectors and terminates them onto Times Microwave plenum-rated low-PIM cablesRead More

The TE LUMAWISE Zhaga-compliant LED holder offers solderless and snap-in features that simplify manufacturing and installation for lighting applications. TE Connectivity announced its new LUMAWISE Type Z50 LED holders. The holders join the LUMAWISE family of products, which offers a solderless, easy-to-assemble termination solution for the LED lighting marketplace. Today’s design engineers want the most efficient, cost-effective,Read More

Hirose IT-P Series power pin connectors are designed for assembly alongside IT3 and IT5 Series high-speed mezzanine connectors. Hirose has strengthened its board-to-board power connector product offering with the development of the flexible and customizable IT-P Series. Featuring a three-piece structure with mating receptacle, interposer, and mounting receptacle, the IT-P Series provides a wide range of variableRead More

The APP five-position Mini PL SPEC Pak connector is environmentally sealed and touch-safe. Anderson Power Products (APP) announced the addition of a five-position offering to the Mini SPEC Pak connector family. This environmentally sealed and touch-safe connector houses up to five contact positions in a compact latching shell. Power handling capabilities up to 23A and 600V AC/DC perRead More