Here is a sneak peek of Bishop & Associates’ upcoming research report on microwave, RF, and millimeter wave connectors. Characteristic Impedance The basic definition of “characteristic” impedance is the value of impedance that causes no change in input when used to terminate a long cable, with “long” being one-tenth or longer than the electricalRead More
End launch connectors are intended for critical applications that require high-performance results. Bishop & Associate’s Dave Shaff looks at the technology that drives that performance and offers a primer on specification for particular applications. End launch connectors are used to transition microwave energy from coaxial to planar transmission-line structures. Test boards, chip demo sets, andRead More
With a record-breaking number of exhibitors, this year’s International Microwave Symposium featured state-of-the-art developments in RF, microwave, and millimeter-wave products. The International Microwave Symposium presented by the IEEE Microwave Theory and Techniques Society (MTT-S) is the premier International event for microwave theory and practice. In addition to the flagship IMS Conference, “Microwave Week 2015”Read More
Bulgin’s Buccaneer 90-degree SMB Antenna complements the existing IP68-rated SMB Antenna family. Bulgin – an Elektron Technology connectivity brand – has launched an environmentally sealed 90-degree SMB Antenna, which offers greater flexibility in system design for RF monitoring and control. Complementing the existing IP68-rated SMB Antenna family, this new option is available for a variety of frequency bandsRead More
Amphenol RF fixed-length SMP cable assemblies are ideal for size-constrained, high-frequency applications. Amphenol RF introduced fixed-length SMP cable assemblies as a pre-configured solution for high-frequency applications with 50-ohm impedance requirements. The cable assemblies offer excellent performance up to 26.5GHz and are highly reliable in test environments. Amphenol SMP pre-configured cable assemblies feature Amphenol RF’s SMP plug connectors,Read More
In RF and microwave applications, blind-mate connections can be challenging because to maintain a constant and uniform signal between circuit boards or modules, you need specially designed blind-mate connectors. Pasternack’s Steve Ellis explains how to specify coaxial blind-mate connectors. A blind-mate connector is used when access to the connection point is not possible, typically caused byRead More
Bel Fuse to acquire Emerson Network Power Connectivity Solutions for $98 million, its third major acquisition in the past 14 months. Bel Fuse Inc. announced it has entered into a definitive agreement to acquire the Emerson Network Power Connectivity Solutions (ECS) business of Emerson Inc. Bel will pay approximately $98 million in cash to acquireRead More
RF Industries Low PIM 4.1-9.5 (Mini) DIN Adapters are between-series adapters for the 4.1-9.5 (Mini) DIN, 7-16 DIN, and N type interfaces. Advanced wireless systems such as DAS (Distributed Antenna Systems) require RF components that, in addition to being highly efficient in signal transfer, must have low PIM (Passive Intermodulation) properties. The N type interface designRead More
As average sales prices for devices decrease, the cost of testing needs to decrease at the same or greater rate. The PXI platform for semiconductor ATE may be the answer. This is an excerpt from a white paper available from Geotest – Marvin Test Systems. The electronics industry is under constant pressure to lower itsRead More
Emerson Network Power Connectivity Solutions introduced the SMPM Coax Connector for high frequency applications where spacing is critical. Emerson Network Power, a business of Emerson, introduced its newest addition to the Johnson line of coax connectors, an SMPM connector ideal for applications such as radar, satellite, and high-density packaging, and for those that require higherRead More
October 2013 – Because coaxial cable assemblies are so vital to such a wide range of systems, from rugged ground-based electronic systems to satellites orbiting in space, the selection process for those cables should not be treated lightly. Choosing the right coaxial cable assembly is easier when you know what to look for in a high-frequency or high-speed coaxial cable assembly.
Molex RF DIN 1.0/2.3 Modular Backplane System is a Subminiature Solution Molex announced a high-performance connector system designed specifically to enable PCB developers in the video, commercial broadcast, and telecommunications industries to transfer multiple RF signals across mated boards in a single assembly while taking into consideration space constraints. The RF DIN 1.0/2.3 Modular BackplaneRead More
