Connectors are frequently selected based on purchase price without fully considering the costs linked with using them. What do connectors really cost? This article is contributed by APEX Electrical Interconnection Consultants. For more of its “Connector Basics” series, click here. Have you ever purchased the lowest-priced item, only to find out that the cost toRead More
Steve Ellis of Pasternack shares five things to know about semi-rigid cable assemblies. In its most basic form, a semi-rigid cable assembly is a coaxial transmission line consisting of a metal tube, typically made from copper, which forms the outer conductor with a metal wire conductor running down the center of the tube. The centerRead More
When an end product fails due to a faulty connector, the team that takes the blame may not be the group that was ultimately responsible for the final purchasing choice. In the end, who owns connector selection responsibility? Many times, when a field problem is tied to specific connector, the question asked is, “Who selectedRead More
Connector contact lubricants can reduce mating forces and contact wear, and there are lubricants to do just that. But the real goal is to get more than just friction/wear reduction from a lubricant. For many of us the first thing that comes to mind when the word “lubricant” comes up is “slippery stuff,” motor oil,Read More
Wondering how to select a connector supplier? The selection method must ensure the supplier can meet all established performance, cost, lead-time, and service requirements. Once several manufacturers’ connectors have been evaluated for a specific application, it is likely that the ultimate selection will be made from at least three or four manufacturers (and maybe moreRead More
The “Connector Basics” series from APEX Electrical Interconnection Consultants continues with a tutorial on how to specify and select a connector for a particular application. Generally speaking, electrical connectors are mechanical components that serve an electrical function. In addition to carrying electrical current at a specified voltage, connectors either enable interconnection of components during theRead More
Erosion in the Connector Industry Talent Base The connector industry has experienced significant erosion of its talent base in recent decades. Because this has occurred bit by bit over a long period of time, it’s not immediately apparent how significantly the industry has been changed by the loss of knowledge and experience these people represent.Read More
Our first in a series of articles about Evolving Levels of Interconnection As this is the first in a planned series of articles by APEX Electrical Interconnection Consultants LLC, we thought it would be best to begin with the “Levels of Interconnection” (LOI), which is about as fundamental as it gets. It must be rememberedRead More
As this is the first in a planned series of articles by APEX Electrical Interconnection Consultants LLC, we thought it would be best to begin with the “Levels of Interconnection” (LOI), which is about as fundamental as it gets. It must be remembered that at every interconnection point, at every level, there is a potentialRead More
December 2013 – In 2014, the engineers and scientists of APEX Electrical Connector Consultants LLC will treat our readers to a series of articles on connector basics. We thought it would be fun to kick off the feature in this issue with a Q&A led by Bishop’s John MacWilliams.
September 2013 – Wear issues are best addressed in the design and manufacture of the connector system. Dr. Bob explains what causes wear in a connector and how the science behind the process works, then makes recommendations to help protect against connector wear in your next design.
October 9, 2012 – RFID solutions may provide a completely new approach to product lifecycle management and value creation in the cable industry. Alexander Schmoldt of Murata explains the latest innovations and how they can transform cabling infrastructure.
